I have used all 10 audio tracks. But, I want to record other instruments to complete the project.
I want to record guitar and vocal on different tracks at the same time. However, a mixed sound was recorded.
When the punch In/Out function is used, a noise is heard at the punch-in position.
Although I made a recording using the default settings, the sound is degraded.
I have used the bounce function to record material onto stereo track, but during playback only one channel is heard.
Playback sound is distorted.
The specification recommends designating the input signal from guitar and bass guitar as a "passive type". Can I input an active type guitar or bass guitar?
Although the fader volume is increased, I cannot hear the sound.
Although I adjusted the balance for each track, the balance is changed when I rewind to the starting point.
Programmed bass pattern on the rhythm section sounds in a little "staccato".
Is it possible to make a step recording of a rhythm pattern?
Is it possible to record the drum track or a bass track on the audio track?
When I created a new project, the original rhythm pattern that I previously programmed is erased.
Is it possible to add drum track on the existing audio track that has no drum track?
Can the MRS-1044CD use a formatted CD-RW disk?
Even though a CD is installed in the CD drive on the MRS-1044CD, the 1044CD displays a "NO DISK" message.
My CD player do not playback CD-R/RW that was made by the MRS-1044 internal CD-R/RW drive.
After writing audio data to a CD-R, the attempt to finalize the disc results in the error message "NOT CD-R".
Can the MRS-1044 be used as a Slave for another MIDI device?
Does USB interface support any USB equipment like recordingmedia?
Error massage appears on the display when a project were copied from CD-ROM.
Although the MRS-1044 is connected to a computer through a USB interface, the computer does not recognize the MRS-1044.
What functions be possible by connecting a UIB-01/02 (USB board)?
Can the UIB-01/02, USB interface be used with a Mac?
Can the UIB-01/02, USB interface be used with Windows XP?
Using Audio File Manager for Windows, I cannot succeed in converting over 200 minutes size V-take to WAV format.
What kind of equipment does SCSI interface support?
I can't make recordings or create rhythm patterns.
When I locate a marker point using the measure/beat/tick indication, the position is shifted by several ticks.